FBT VHA118.2SA/VHA406A Horizon Active Line Array – Combo One

Description Combo Includes: 2 x FBT VHA118.2SA HORIZON ACTIVE SUBWOOFER 18in 2500WRMS 2 x FBT VHA-B 406 – Horizon Ground Stack Metal Frame to ground VHA406 array and stack on VHA 118SA 6 x FBT HORIZON VHA406A 4×6.5″ POWERED ARRAY 600W 300W RMS 4 x CX16-1 POWER LEAD PWC TRUE M – PWC TRUE F 1.5m 4 x SIGNAL LEAD XLR M – XLR F 1.5m 2 x PDC CX35-12 SIGNAL LEAD XLR MALE – XLR FEMALE 12M   FBT VHA118.2SA Horizon Subwoofers For larger spaces, the ground-stacked VHA118.2SA is an exceptionally powerful and versatile subwoofer that sets a new standard for SPL to size ratio. Comprising a single 18” B&C woofer, the birch plywood, bass reflex sub again deploys a laminar air-flow for refined performance, while its 2,500W Class-D amplifier module offers a selection of six entirely rewritten preset algorithms. The design of the VHA118SA has produced a unique low-end module that is capable of generating extremely high levels of SPL for prolonged periods. Using BEM finite element simulations, FBT has optimized the woofer’s load volume, while careful study of the grille and the assembly’s protective fabric have minimized acoustic impedance for a net improvement in performance compared to previous models. The addition of the VHA118SA extends the overall system frequency response to 30Hz, while the sub can support fully ground-stacked configurations courtesy of special integrated mounting hardware. Bass-reflex amplified subwoofer  460mm (18″) high excursion woofer B&C with 100mm (4″) coil Frequency response from 30Hz to 100Hz  2500Wrms class D amplifier with switching power supply  DSP processor with 6 presets, 6-step delay Control panel with XLR input and stereo link, volume, presets, delay, phase 0°-180°, status led Neutrik PowerCON TRUE1 IN and LINK power connectors  Box in 18mm (0.7”) birch plywood with anti-scratch varnish Two M20 stand sockets and 4 FBT aluminum handles, predisposed for 4 x 100mm (4”) swivel casters  Integrated mechanics compatible with VHA406A and VHA112SA for ground stack configurations. Extremely robust grid with protective fabric Ideal for reinforcing and extending the low range of the VHA system, it can only be used with VHA406A   FBT VHA406A Horizon Active Line Arrays The FBT HORIZON VHA 406A is a compact, self-powered line array element. The FBT HORIZON VHA 406A features 4 x 6,5″ woofers plus a 1,4″ neodymium compression driver with a 2,5″ voice coil for a frequency response that extends from 65Hz to 20kHz. The Class D amplifier module is constructed in die-cast aluminum with natural convection to deliver 600W for the LF section and 300W for the HF, with switching power supply. The waveguide, designed specifically for this product and optimized with BEM (boundary element method), has a horizontal dispersion of 90°and vertical of 20°. The FBT HORIZON VHA 406A offers the possibility to choose between 8 pre-definied algorithms; the controls and connections panel features: Neutrik powercon connector for power supply with input and output, XLR in/link connectors, level control, HF level, preset selector, HP filter switch, two status led. The construction materials of The FBT HORIZON VHA406Ameet the highest professional standards to ensure maximum reliability; the cabinet is in birch plywood of 0,47″ with anti-scratch varnish and is provided with two handles with rubber inserts and integrated mechanics to join the speakers and angle them from 5° to 20° in 5° steps. The FBT HORIZON VHA406A also boats integrated quickrelease anchor points that facilitate the creation of horizontal and vertical arrays using the dedicated flybar. The FBT HORIZON VHA 406A provides a wide range of accessories for suspension, pole-mounting or ground-stacking. The front of the loudspeaker is covered with a powder coated perforated steel grille. Available a rain cover that protects the electronic parts from the rain. Bi-amplified 2-way line array 4 x 165mm (6.5 “) custom woofers with 38mm (1.5″) coil Neodymium B&C compression HF driver with 36mm (1.4″) spout and 64mm (2.5″) coil Large format FBT waveguide with 90° (H) x 20° (V) dispersion Frequency response from 65Hz to 20KHz Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply DSP processor with 8 equalization presets Control panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik PowerCON TRUE1 IN and LINK power connectors Cabinet in 12mm (0.5”) birch plywood with anti-scratch varnish Handles with rubber inserts and rubber-coated sides to protect the cabinet from bumps and scratches Side suspension hardware with integrated setting pins, inclination between adjacent cabinets from 5° to 20° in 5° steps. Possibility of vertical and horizontal installation through dedicated flybars Wide range of accessories for suspension, pole-mounting or ground-stacking Ideal for both live applications, assisted by one or both subs of the VHA range, and for fixed installations