Celto Acoustique CT15 G2

Description Celto Acoustique CT15 G2 15″ Speaker CT15 G2 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitor in small stages, and delay fill. Real 700W / 2800W Peak RMS Power Capacity Natural Sound And Incredible Holographic Reproduction With Extended Low End Optimized For Smooth Frequency Response In And Out Axis Premium Custom CELTO Acoustique Drivers Proprietary 80ºx50º Rotatable 6th Order Polynomial Horn Birch Plywood Cabinet With Tongue & Groove Assembly Touring Grade Gloss-Free Black Painting Specs Speaker type Multi-purpose full range Power Handling (AES standard) 700W RMS / 2800W Peak Nominal impedance 8 ohms Average sensitivity 98dB / 1W / 1m Maximum SPL (calculated) 127 dB RMS / 133dB Peak Frequency response (-6dB no preset) 48~22000Hz Nominal directivity (-6dB) 80° (H) x 50° (V) Cabinet material Outdoor grade Birch Plywood Cabinet finish Textured Waterborne Black coating | Integral Airnet fabric on Front grill Floor monitor use Yes (symetrical) Flying hardware 16 M8 points Mounting hardware Ø35mm socket (0° and 10°) LF 13.5″ CELTO Acoustique 13B700 Woofer Chassis Die Cast Aluminum Woofer Voice coil diameter 3.6″ / 91mm HF CELTO Acoustique ACD44 HF RMS power (AES standard) 80W above 1.2kHz HF Exit 1″ / 25mm HF Voice coil diameter 1.7″ / 44mm HF Diaphragm HSP Annular Ring Radiator Crossover 1.4kHz 2-way passive network Connectors Genuine NEUTRIK, 2pcs Speakon NL4MP Speaker size (HxWxD) 445x710x414 mm Speaker Weight 28kg Shipping information 34kg | 520x820x545 mm Accessories CT15G2-YOKE | CT15-SBAG (padded cover bag) | CPC-70 (pole bar with crank) | KTV-BRKT1 (ceiling mounting braket) | WMBRKT60 (wall mounting braket)